Adjusting The Paper Feeder - Tally T8106 User Manual

Adjusting the Paper Feeder

When printing from the paper feeder, if your documents are not centered
on the paper, use the following procedure to adjust the margins of the
documents.
A
1. Set the paper feeder as the source tray and print a test pattern.
2. Measure the left margin and right margin in millimeters.
3. Subtract the left margin from the right margin and multiply the result
by five.
4. Turn off the printer, and then turn it on. Wait about 20 seconds
while the display shows Loading... .
5. Press MENU/ENTER/
Self Test, and continue pressing until the ONLINE lamp blinks.
6. The display will show Utility MenuClear FC. Roll.
7. Press either TRAY/ or MEDIA/
utility menu for the tray you want to adjust.
Utility Menu Utility Menu Utility Menu Utility Menu
Tray 2 Margin Tray 2 Margin
Tray 2 Margin Tray 2 Margin
Utility Menu Utility Menu
Utility Menu Utility Menu
Tray 2 Margin Tray 2 Margin
Tray 2 Margin Tray 2 Margin
Select Margin 2 Select Margin 2
Select Margin 2 Select Margin 2
0 0 0 0
Chapter 8 Options and Accessories
B
Printed image
immediately when the display shows
until the display shows the
8. In the Utility menu, adjust the Mar-
gin settings using the menu naviga-
tion keys.
9. Select the appropriate paper tray.
10. Press the ENTER key. The current
settings appear at the bottom of
the display.
115