Setting The Fuser Cleaning Roller Counter To Zero - Tally T8106 User Manual

Tally T8106/T8406 Color Laser Printers User Guide

Setting the Fuser Cleaning Roller Counter to Zero

4. Press MENU/ENTER/
5. Press either TRAY/ or MEDIA/
6. Press MENU/ENTER/
7. Press MENU/ENTER/
14
Printer software tracks fuser cleaner roller usage. After the counter
reaches a pre-set number, the printer displays a message to indicate that
maintenance is necessary.
After initial installation, or whenever you replace the fuser cleaning roller,
set the counter to zero.
Not Execute.
FC. Roll Execute.
the display will show Completed Clear FC. Roll.
Clear FC. Roll.
1. Turn on the printer and wait about 20
seconds while the display shows Load-
ing....
2. Press MENU/ENTER/
ately when the display shows Self Test,
and continue pressing until the
ONLINE lamp blinks.
3. The display will show Utility Menu-
Clear FC. Roll.
Note: For more information about displayed
error messages, see "Appendix D Control Panel
Messages" on page 163.
. The display will show Clear FC. Roll
until the display shows Clear
once, and after approximately 10 seconds,
. The display will show Utility Menu
immedi-