The Printer Is Out Of Paper - No Paper Out Fault Is Reported; No Paper Motion - No Paper Motion Fault Is Reported - Tally T6090 Maintenace Manual

The Printer is out of paper — No Paper Out fault is reported
There are three things that can cause this problem.
1. Fault override for paper out sensor is on, disabling the paper out sensor.
2. Calibration values have been lost for the paper out sensor.
3. Malfunctioning Engine CBA.
STEP 1. Check to see if the fault override is enabled for Paper Out sensing.
STEP 2. If Fault Overrides are not enabled, check the sensor connections and recalibrate the
Paper Out sensor. (See Chapter 2, under Diag Category.)
STEP 3. If none of the above checks eliminates the problem, the most likely cause is a malfunc-
tioning Engine Controller CBA. Remove and replace the Engine Controller CBA.
If you have no idea how long the printer has been banging away with no paper
installed, check the platen for damage. If necessary, remove and replace the platen
and any damaged hammers.
No Paper Motion — No Paper Motion fault is reported
There are three things that can cause this problem
1. Fault override for paper motion sensor is on, disabling the paper motion sensor.
2. Defective Paper Motion Sensor.
3. Malfunctioning Engine Controller CBA.
STEP 1. Check to see if the fault override is enabled for Paper Motion sensing.
STEP 2. Use the PapMot Meteer Test to check the sensor If it does not check correctly, remove
and replace the upper tractor set.
STEP 3. If none of the above checks eliminates the problem, the most likely cause is a malfunc-
tioning Engine Controller CBA. Remove and replace the Engine Controller CBA.
If you have no idea how long the printer has been banging away with no paper
motion, check the platen for damage. If necessary, remove and replace the platen
and any damaged hammers.
Chapter 3: Troubleshooting
3–15