Cleaning The Paper Discharger - Tally T8106 User Manual

Cleaning the Paper Discharger

Use dry soft cotton cloth and a cotton swab to clean the transfer roller
following the procedure below.
6. Reinstall the paper discharger by inserting the left end of the paper
discharger into the cradle, and then lowering the right side until it is
fully seated.
7. Close the rear cover and plug in the printer power cord.
Chapter 7 Cleaning the Printer
1. Turn off and unplug the printer.
2. Open the back cover of the printer.
3. Remove the paper discharger by slid-
ing it to the left, then lifting it out of
its cradle on the right side.
4. Use a dry cotton cloth to remove any
dust or toner on the exterior of the
discharger.
5. Use a dry cotton swab to clean the
paper discharger wire and the interior
of the discharger.
101