Managing Netware Settings; Configuring The Printer For Print Server Mode - Tally T8106 User Manual

Appendix E Network Management

Managing NetWare Settings

You can manage NetWare settings from two different dialogs in the Web
Interface depending on how you will be using the printer on your
network. If you are using the printer in print server mode, select
NetWare PServer Settings. If you are using the printer in remote printer
mode, select NetWare Remote Printer. Before you can use the Web
interface to configure the printer, you must set the IP address of the
printer.

Configuring the Printer for Print Server Mode

Before you can use the Web interface to configure the printer, you must
first configure the IP address of the printer. If you plan to use print server
mode for network printing, you must configure both the printer and the
server for PServer mode.
The following shows the settings required to set up a NetWare Print
Server if you are using Directory Services, Bindery, or both Bindery and
Directory Services.
179