Configuring SNMP Server Settings
This printer supports SNMP to manage its network interface. You can use
MIB II, Printer MIB, and TRAP for SNMP management.
Parameter
Monitor
Community
Control
Community
Trap
Community
Trap Target
Authentication
Traps
Appendix E Network Management
Description
Sets a community name for reading MIB.
Sets a community name for writing MIB.
Sets a community name for the TRAP informa-
tion.
Sets the send destination of the TRAP informa-
tion. This setting will validate TRAP. You can
select IP and IPX as the TRAP send protocol.
Enter 0 or 1 to the beginning of an address as a
protocol identification flag.
Enables or disables Authentication Traps.
195