T8106
T8406
Turning On the Printer
1. Press the main power switch. The printer will perform a series of diag-
nostic tests and then begin the warm-up cycle. This process may take
up to 4 minutes.
2. Once the printer has completed the warm-up cycle, make sure the
printer display reads "Ready."
Note:
If the MESSAGE lamp is lit, a printer error has occurred. Check the
display for an error message. See "Chapter 9 Troubleshooting" on page 117.
Chapter 2 Setting Up Your Printer
3. Place about 100 sheets of A4 or
standard letter-size (8-1/2" x
11") paper into the paper tray.
4. Replace the tray cover (T8406
only).
5. Slide the paper tray back into the
printer carefully until it locks.
19