Network Management
Overview
Network Interface
Supported Frame Types
The Tally T8106/T8406 printers utilize a standard network interface and a
number of standard protocols for cross-platform printing across the
network.
The printer has a single port that accepts a standard RJ45 Ethernet
connector. The Ethernet port supports both 10baseT and 100baseTX
through automatic switching.
The printer supports a number of standard frame types for cross-
platform compatibility. It will autodetect the frame type being used for a
NetWare network.
TCP/IP
NETBIOS / NetBEUI (native)
NetWare IPX/SPX
AppleTalk
Note:
If you allocate the same numbers for two different types of NetWare
servers on the same segment, the printer cannot autodetect the frame type being
used. Change the network number of one of the servers.
Appendix E
Ethernet II
802.3
802.2
Ethernet II
802.3
802.3/802.2 (Ethernet_802.2)
802.3/802.2 SNAP (Ethernet_SNAP)
802.3/802.2 SNAP
171