EnGenius EOC1650
Click on the Browse button and then select the appropriate firmware and then click on the
Upgrade button.
Note: The upgrade process may take about 1 minute to complete. Do not power off the
device during this process as it may crash the device and make it unusable. The device will
restart automatically once the upgrade is complete.
6.5.5 Time Settings
Click on the Time Settings link under the Management menu. This page allows you to
configure the time on the device. You may do this manually or by connecting to a NTP server.
Manually Set Date and Time: Specify the date and time
Automatically Get Date and Time: Select the time zone from the drop down list and then
specify the IP address of the NTP server.
Click on the Apply button to save the changes.
6.5.6 Log
Click on the Log link under the Management menu. The Log page displays a list of events
that are triggered on the Ethernet and Wireless interface. This log can be referred when an
unknown error occurs on the system or when a report needs to be sent to the technical
support department for debugging purposes.
Wireless Access Point / Client Bridge
Version 2.0
52