EnGenius EOC1650
6.2 Status
6.2.1 Main
Click on the Main link under the Status drop‐down menu. The status that is displayed
corresponds with the operating mode that is selected. Information such as Device Name,
Ethernet MAC Address, Wireless MAC Address, Country, Current Time and Firmware are
displayed in the 'System Information' section. IP address, Subnet Mask, Default Gateway
and DHCP Client are displayed in the 'LAN Settings' section. In the 'Current Wireless Settings'
section, the Operation Mode, Wireless Mode, Channel/Frequency, Spanning Tree Protocol
and Distance are displayed.
Wireless Access Point / Client Bridge
Click on the Status link on the navigation drop‐down
menu. You will then see three options: Main, WDS
Link Status, and System Log. Each option is described
in detail below.
Version 2.0
43