EnGenius EOC1650
6 WDS Bridge Operating Mode
6.1 Logging In
To configure the device through the web‐browser, enter the IP address of the device
(default: 192.168.1.1) into the address bar of the web‐browser and press Enter.
Make sure that the device and your computers are configured on the same subnet. Refer to
Chapter 2 in order to configure the IP address of your computer.
After connecting to the IP address, the web‐browser
will display the login page.
Specify admin for both the user name and password.
After logging in you will graphical user interface (GUI)
of the device. The navigation drop‐down menu on left
is divided into four sections:
1.
Status: Displays the overall status, WDS link status
and system log.
2.
System: This menu includes the system properties,
IP and Spanning Tree settings.
Wireless: This menu includes network setting, WDS link setting, WDS security and
3.
advanced setting.
Management: This menu includes the admin setup, SNMP, firmware upgrade, time setting,
4.
diagnostics and save/restore backup.
Wireless Access Point / Client Bridge
Version 2.0
42