EnGenius EOC1650
Restore saved settings from a file: Once a file has been backed up, you may restore it by
clicking on the Browse button to select the file, and then the Restore button.
Revert to factory default settings: Click on the Factory Default Settings button to reset the
device to the default settings. Please wait while the device restart and then access the
device using the default IP address: 192.168.1.1
7.6.4 Firmware Upgrade
Click on the Upgrade Firmware link under the Management menu. This page is used to
upgrade the firmware on the device. Make sure that downloaded the appropriate firmware
from your vendor.
Click on the Browse button and then select the appropriate firmware and then click on the
Upgrade button.
Note: The upgrade process may take about 1 minute to complete. Do not power off the
device during this process as it may crash the device and make it unusable. The device will
restart automatically once the upgrade is complete.
7.6.5 Time Settings
Click on the Time Settings link under the Management menu. This page allows you to
configure the time on the device. You may do this manually or by connecting to a NTP server.
Wireless Access Point / Client Bridge
Version 2.0
70