Backup/Restore Settings, Reset To Factory Default Settings - EnGenius EOC1650 User Manual

EnGenius EOC1650
SNMP Enable/Disable: Choose to enable or disable the SNMP feature.
Contact: Specify the contact details of the device.
Location: Specify the location of the device.
Read‐Only Community Name: Specify the password for access the SNMP community for
read only access.
Read‐Write Community Name: Specify the password for access to the SNMP community
with read/write access.
Trap Destination IP Address: Specify the IP address of the computer that will receive the
SNMP traps.
Trap Destination Community Name: Specify the password for the SNMP trap community.
Click on the Apply button to save the changes.
7.6.3 Backup/Restore settings, Reset to factory default settings
Click on the Backup/Restore Setting link under the Management menu. This option is used
to save the current settings of the device in a file on your local disk or load settings on to the
device from a local disk. This feature is very handy for administrators who have several
devices that need to be configured with the same settings.
Save a copy of the current settings: Click on the Backup button to save the current
configuration.
Wireless Access Point / Client Bridge Version 2.0
69