EnGenius EOC1650 User Manual page 23

EnGenius EOC1650
Data Rate: If you would like to force a data rate, you may select one from the drop‐down list.
However, for best performance it is recommended to use the Auto setting.
Transmit Power: You may have the different application distance of the device by selecting a
value from the drop‐down list. This feature can be helpful in restricting the coverage area of the
wireless network.
Fragment Length: Packets over the specified size will be fragmented in order to improve
performance on noisy networks.
RTS/CTS Threshold: Packets over the specified size will use the RTS/CTS mechanism to maintain
performance in noisy networks and preventing hidden nodes from degrading the performance.
Protection Mode: If your wireless network is using both 802.11b and 802.g devices then it is
recommended to enable this feature so that the 802.11b devices will not degrade the
performance of 802.11g devices.
WMM: Enable wireless Quality of Service
Distance (1‐30km): Specify a distance between 1 and 30Km.
Channel Bandwidth: For different application, you can select 20MHz, 10MHz or 5MHz channel
bandwidth.
Click on the Apply button to save the changes.
Wireless Access Point / Client Bridge Version 2.0
23