Management -> Firmware Upgrade; Management -> Time Settings - EnGenius EOC5510 User Manual

Wireless long range access point / client bridge

Hide thumbs Also See for EOC5510:

Table of Contents

Save A Copy of Current

Settings

Restore Saved Settings

from a File

Revert to Factory Default

Settings

8.5 Management -> Firmware Upgrade

Click on the Firmware Upgrade link under the Management menu. This page is used to upgrade the

firmware of the device. Make sure that downloaded the appropriate firmware from your vendor.

Auction: Upgrade process may take few minutes, please do not power off the device and it may cause

the device crashed or unusable. EOC5510 will restart automatically once the upgrade is completed.

8.6 Management -> Time Settings

Click on the Time Settings link under the Management menu. This page allows you to configure the

time on the device. You may do this manually or by connecting to a NTP server.

Click on Backup to save current configured settings.

EOC5510 can restore a previous setting that has been saved. Click on Browse to

select the file and Restore.

Click on Factory Default button to reset all the settings to the default values.

Table of Contents