EnGenius EOC1650
4.5
Management
4.5.1 Administration
Click on the Administration link under the Management menu. This option allows you to create
a user name and password for the device. By default, this device is configured without a user
name and password admin. For security reasons it is highly recommended that you create a new
user name and password.
Name: Specify a user name into the first field.
Password: Specify a password into this field and then re‐type the password into the Confirm
Password field.
Click on the Apply button to save the changes.
4.5.2 Management VLAN
Click on the Management VLAN link under the Management menu. This option allows you to
specify VLAN ID(From 1 to 4095). ( Caution : If you reconfigure the Management VLAN ID, you
may lose connectivity to the access point. Verify the switch and DHCP server can support the
reconfigured VLAN ID, and then reconnect to new IP address )
Wireless Access Point / Client Bridge
Click on the Management link on the navigation drop‐
down menu. You will then see seven options:
administration, SNMP settings, backup/restore settings,
firmware upgrade, time settings, and log. Each option is
described below.
Version 2.0
24