EnGenius EOC1650
6.4.1 Wireless Network
The Wireless Network page allows you to configure the wireless mode, channel, SSID, and
security settings.
Wireless Mode: Depending on the type of wireless clients that are connected to the
network, you may select B, G or B/G‐mixed. If you are not sure about which clients will be
accessing the wireless networks, it is recommended that you select B/G‐mixed for the best
performance.
Channel/Frequency: Select a channel from the drop‐down list. The channels available are
based on the country's regulation.
6.4.2 WDS Link Settings
Click on the WDS Link Settings link under the Wireless drop‐down menu. This page allows
you to setting your WDS device link up to 16 units.
Wireless Access Point / Client Bridge
Version 2.0
47