EnGenius EOC1650
device to use a static IP address. In this case, you would be required to specify an IP address,
subnet mask, and default gateway IP address.
IP Address: Specify an IP address
IP Subnet Mask: Specify the subnet mask for the IP address
Default Gateway: Specify the IP address of the default gateway.
Click on the Apply button to save the changes.
5.3.3 Spanning Tree Settings
Click on the Spanning Tree link under the System drop‐down menu Spanning‐Tree Protocol is a
link management protocol that provides path redundancy while preventing undesirable loops in
the network.
Spanning Tree Status: Choose to enable or disable the spanning tree feature.
Bridge Hello Time: Specify the number of seconds for the hello time.
Bridge Max Age: Specify the number of seconds for the max age.
Bridge Forward Delay: Specify the number of seconds for the bridge forward delay.
Priority: Specify the number of seconds for the priority.
Click on the Apply button to save the changes.
5.4
Wireless
5.4.1 Wireless Network
The Wireless Network page allows you to configure the wireless mode, channel, SSID, and
security settings.
Wireless Access Point / Client Bridge
Click on the Wireless link on the navigation drop‐down
menu. You will then see three options: wireless network,
wireless security, and wireless advanced settings. Each
option is described below.
Version 2.0
33