EnGenius EOC1650
6.3 System
6.3.1 System Properties
Click on the System Properties link under the System drop‐down menu. This page allows
you to switch the operating mode of the device, as well as specify a name and select the
operating region.
Device Name: Specify a name for the device (this is not the SSID),
Country/Region: Select a country from the drop‐down list.
Operating Mode: Select and operating mode. Configuration for each operating mode is
described in their respective chapters.
Click on the Apply button to save the changes.
6.3.2 IP Settings
Click on the IP Settings link under the System drop‐down menu This page allows you to
configure the device with a static IP address or a DHCP client.
Wireless Access Point / Client Bridge
Click on the System link on the navigation drop‐down
menu. You will then see System Properties, IP Settings
and Spanning Tree Settings.
Version 2.0
45