EnGenius EOC1650
6.5.1 Administration
Click on the Administration link under the Management menu. This option allows you to
create a user name and password for the device. By default, this device is configured
without a user name and password admin. For security reasons it is highly recommended
that you create a new user name and password.
Name: Specify a user name into the first field.
Password: Specify a password into this field and then re‐type the password into the Confirm
Password field.
Click on the Apply button to save the changes.
6.5.2 SNMP Settings
Click on the SNMP Settings link under the Management menu. This option allows you to
assign the contact details, location, and community name and trap settings for SNMP. This is
a networking management protocol used to monitor network‐attached devices. SNMP allows
messages (called protocol data units) to be sent to various parts of a network. Upon
receiving these messages, SNMP‐compatible devices (called agents) return data stored in
their Management Information Bases. .
SNMP Enable/Disable: Choose to enable or disable the SNMP feature.
Contact: Specify the contact details of the device.
Location: Specify the location of the device.
Wireless Access Point / Client Bridge
Version 2.0
50