Wireless Mac Filter - EnGenius EOC1650 User Manual

EnGenius EOC1650
Security Mode: Select WPA, WPA2 or WPA Mixed from the drop‐down list if your wireless
network uses WPA. WPA (Wi‐Fi Protected Access) was designed to improve upon the security
features of WEP (Wired Equivalent Privacy). The technology is designed to work with existing
Wi‐Fi products that have been enabled with WEP. WPA provides improved data encryption
through the Temporal Integrity Protocol (TKIP), which scrambles the keys using a hashing
algorithm and by adding an integrity checking feature which makes sure that keys haven't been
tampered with.
Encryption: Select TKIP or AES from the drop‐down list if your wireless network uses this
encryption.
RADIUS Server: Enter the IP address of the RADIUS server.
RADIUS Port: Enter the port number of the RADIUS server. The default is usually 1812.
RADIUS Secret: Enter the shared password of the RADIUS server.
Group Key Update Interval: Specify the number of seconds after which the Access Point will
probe the client for the secret.
Click on the Save button to save the changes.
Profile (SSID) Isolation: When you select this function to enable, unit can isolate all profiles(SSIDs)
from each other using VLAN standard.
4.4.2 Wireless MAC Filter
Click on the Wireless MAC Filter link under the Wireless menu. On this page you can filter the
MAC address by allowing or blocking access the network.
Wireless Access Point / Client Bridge Version 2.0
21