EnGenius EOC1650
MAC Address: you can input the MAC address of WDS device, which you want to link.
Mode: Enable to connect, and Disable to disconnect.
Click on the Apply button to save the changes.
6.4.3 WDS Security
Security Mode: Select WEP from the drop‐down list if your wireless network uses WEP
encryption. WEP is an acronym for Wired Equivalent Privacy, and is a security protocol that
provides the same level of security for wireless networks as for a wired network.
WEP Key: Select a key format from the drop‐down list. 64bit‐hex keys require 10 characters,
where as 128‐bit keys require 26 characters and 152‐bits keys require 32 characters. A hex
key is defined as a number between 0 through 9 and letter between A through F and a
through f.
Click on the Apply button to save the changes.
6.4.4 Wireless Advanced Settings
Click on the Wireless Advanced Settings link. On this page you can configure the advanced
settings to tweak the performance of your wireless network. Options available are: data rate,
transmit power, fragmentation threshold, RTS threshold, protection mode and distance.
Wireless Access Point / Client Bridge
Version 2.0
48