EnGenius EOC1650
Name: Specify a user name into the first field.
Password: Specify a password into this field and then re‐type the password into the Confirm
Password field.
Click on the Apply button to save the changes.
5.5.2 SNMP Settings
Click on the SNMP Settings link under the Management menu. This option allows you to assign
the contact details, location, and community name and trap settings for SNMP. This is a
networking management protocol used to monitor network‐attached devices. SNMP allows
messages (called protocol data units) to be sent to various parts of a network. Upon receiving
these messages, SNMP‐compatible devices (called agents) return data stored in their
Management Information Bases.
SNMP Enable/Disable: Choose to enable or disable the SNMP feature.
Contact: Specify the contact details of the device.
Location: Specify the location of the device.
Read‐Only Community Name: Specify the password for access the SNMP community for read
only access.
Read‐Write Community Name: Specify the password for access to the SNMP community with
read/write access.
Send SNMP Trap: Specify the IP address of the computer that will receive the SNMP traps.
Trap Community Name: Specify the password for the SNMP trap community.
Click on the Apply button to save the changes.
Wireless Access Point / Client Bridge
Version 2.0
38