EnGenius EOC1650
Manually Set Date and Time: Specify the date and time
Automatically Get Date and Time: Select the time zone from the drop down list and then
specify the IP address of the NTP server.
Click on the Apply button to save the changes.
7.6.6 Log
Click on the Log link under the Management menu. The Log page displays a list of events
that are triggered on the Ethernet and Wireless interface. This log can be referred when an
unknown error occurs on the system or when a report needs to be sent to the technical
support department for debugging purposes.
Syslog: Choose to enable or disable the system log.
Log Server IP Address: Specify the IP address of the server that will receive the system log.
Local Log: Choose to enable or disable the local log.
Click on the Apply button to save the changes.
7.6.7 Diagnostics
Click on the Diagnostics link under the Management menu. In this page, user can let unit to
ping other network equipment. And user also can monitor a route from unit to your target.
Wireless Access Point / Client Bridge
Version 2.0
71