Date And Time Settings - EnGenius EAP1300EXT User Manual

Date and Time Settings

This page allows you to set the internal clock of the Access Point. To access the Date and Time settings, click Time Zone
under the Management tab on the side bar.
Manually Set Date and Time: Manually specify the date and time.
Synchronize with PC: Click to synchronize the Access Point's internal clock with the computer's time.
Automatically Get Date and Time: Enter the IP address of an NTP server or use the default NTP server to have the
internal clock set automatically.
Time Zone: Choose the time zone you would like to use from the drop-down list.
Enable Daylight Savings: Check the box to enable or disable daylight savings time for the Access Point. Next, enter the
dates that correspond to the present year's daylight savings time.
Click Apply to save the changes.