Wds Link Settings; Wireless Advanced Settings - EnGenius EOC1650 User Manual

EnGenius EOC1650
ACL (Access Control) Mode: You may choose to Disable, Allow Listed, or Deny Listed MAC
addresses from associating with the network. By selecting Allow MAC in the List, only the
address listed in the table will have access to the network; all other clients will be blocked. On
the other hand, selected Deny MAC in the List, only the listed MAC addresses will be blocked
from accessing the network; all other clients will have access to the network.
MAC Address: Enter the MAC address.
This table lists the blocked or allowed MAC addresses; you may delete selected MAC address or
delete all the addresses from the table by clicking on the Delete button.
Click on the Apply button to save the changes.
4.4.3 WDS Link Settings
Click on the WDS Link Settings link under the Wireless menu. On this page you can set the WDS
link to connect to another WDS AP or WDS Bridge. The Maximum connection is up to 8 units.
4.4.4 Wireless Advanced Settings
Click on the Wireless Advanced Settings link. On this page you can configure the advanced
settings to tweak the performance of your wireless network. Options available are: data rate,
transmit power, fragmentation threshold, RTS threshold, protection mode and distance.
Wireless Access Point / Client Bridge Version 2.0
22