Making Exposure Settings - Epson PhotoPC 3000Z User Manual

3. In the Program camera mode, press the W/B
button to toggle between AUTO, FIX and
CUSTOM.
In the Manual camera mode, press the Menu
Change button. Then press the W/B button to
toggle between AUTO, FIX, and CUSTOM and
press BACK to save your setting.
Note:
The selected white balance setting is shown beneath
W/B on the LCD monitor.
Making a custom white balance setting
Follow the steps below to create your own white
balance setting.
Note:
A custom white balance setting remains saved when the
camera is turned off.
1. Remove the lens cap, turn the dial switch to
and turn on the camera.
2. Press the Shot SETUP button.
Press the New W/B button. A confirmation
3.
message is displayed. Press Yes to continue
making settings.
4-10
Making Settings
4. Place a white sheet in front of the camera lens so
that it fills the entire LCD monitor.
Note:
You can also use a colored sheet. For example, to
create a sepia hue, use a blue sheet. To create a blue
hue, use a yellow sheet. Experiment with other
colors for different effects.
To quit without making a custom white balance
setting, press BACK.
5. Press the shutter button to make the new setting.
To use your custom white balance setting, see
"Changing the white balance setting" on page 4-9.

Making exposure settings

The PhotoPC 3000Z allows you to make many levels
of exposure settings in a variety of ways. The
following sections explain how to make predefined
exposure settings when in the Program camera mode,
and how to manually make basic or advanced
exposure settings in the Program or Manual camera
mode.