Epson PhotoPC 3000Z User Manual page 67

Hide thumbs Also See for PhotoPC 3000Z:
Table of Contents

Advertisement

HyPict
When these icons are shown on the
display panel, you can take HyPict or TIFF
photos.
HyPict images are captured at 2544 1904
pixels, or 2544 952 pixels for panoramic
photos. These pictures have even higher
detail than super fine images, and the
included 16 MB CompactFlash Card
stores approximately 12 HyPict photos or
25 HyPict panoramic photos without
audio recordings.
For information on TIFF photos, see the next section.
Note:
The image quality setting is retained when the camera
is turned off.
The number of photos that you can take varies
depending on the complexity of the photo and the
number and length of audio recording files saved on the
memory card.
After you take a picture using the HyPict setting, the
camera takes approximately 14 seconds to process the
image.
HyPict is not available when using the continuous
shooting feature.
Taking photos in the TIFF file format
In addition to the four basic image quality settings,
your PhotoPC 3000Z allows you to take
uncompressed images in the TIFF file format. These
images are captured at 2048
highest image quality, but have a much larger file size
and take longer to process. The included 16 MB
CompactFlash Card stores approximately one TIFF
photo, or three TIFF panoramic photos.
To take TIFF photos, follow these steps.
Note:
To take a TIFF photo, you must use a CompactFlash
Card that has at least 9.1 MB of memory available.
The continuous shooting feature is disabled when
taking TIFF photos.
1.
Remove the lens cap, turn on the camera, and set
the dial switch to
2.
Press the Shot SETUP button.
3.
Press the Image button to select TIFF.
Note:
Selecting JPEG allows you to take photos using the
HyPict image quality setting, instead of the TIFF file
format.
1536 and offer the
.
4-3
Making Settings
4

Advertisement

Table of Contents
loading

Table of Contents