Using The Basic Playback Feature - Epson PhotoPC 3000Z User Manual

4. Hold the camera still until the camera makes a
clicking sound. Then release the shutter button.
After the picture is taken, it remains displayed on
the monitor until the camera finishes processing
it. After the green indicator light comes on, you
can take another photo or display or manage your
photos. See "Viewing and Managing Your
Images" on page 3-1.

Using the basic playback feature

When you take photos using the LCD monitor, you
can view the photos that you have already taken using
the basic playback feature. Using this feature, you can
view your photos without having to turn the dial
switch to the position after taking a photo. To use
the basic playback feature, you must first make some
settings. Follow these steps.
Note:
Using this feature increases the amount of time
that you must wait after taking a picture before
you can take the next one.
You cannot view video clips using the basic
playback feature.
1. Remove the lens cap, set the dial switch to
and turn on the camera.
2-10
Taking Pictures
2. Press the Shot SETUP button on the back of the
camera.
Note:
For an explanation on using the buttons on the back of
the camera, see "Using the LCD monitor buttons" on
page 2-5.
3. Press the Confirmation button to select On.
4. Turn the dial switch to
5. After the camera processes the photo, the
appears briefly next to the top-right LCD monitor
button. Press this button while the icon is
displayed to playback your photos.
To delete the photo you just took, press the
Delete button. Before taking more photos, press
the BACK button.
During playback, you can enlarge or erase photos,
view multiple photos, and play back audio recordings.
Refer to the appropriate section below.
To enlarge photos, see "Magnifying photos" on
page 3-2.
To erase photos, see "Erasing images" on page
,
3-7.
and take a picture.
icon