Epson PhotoPC 3000Z User Manual page 106

The image on the LCD monitor is too dark, or is not
visible at all.
Adjust the brightness of the LCD monitor,
following the instructions in "Setting the LCD
monitor's brightness level" on page 4-21.
Make sure that the dial switch is set to
or .
Note:
The LCD monitor shuts off automatically when you
use EPSON Photo!3.
You cannot take certain kinds of pictures or make the
settings that you want when using the LCD monitor.
Some of the camera's settings and features cannot
be used at the same time. For example, you cannot
use the continuous shooting feature and the
HyPict image quality setting at the same time. For
instructions on making camera settings, see
Chapter 2, "Taking Pictures."
To adjust the white balance, exposure, and
sensitivity settings, you must first select the
Program or Manual camera mode. See "Making
camera mode settings" on page 4-5.
7-6
Maintenance and Troubleshooting
Nothing appears on the TV monitor when the
camera is connected to your television.
Make sure that the AV cable is connected
correctly. For details, see "Viewing Pictures on a
Television" on page 3-11.
, , Make sure that the camera is on and that the dial
switch is turned to
Make sure that the television is switched to video
mode.
Make sure that the batteries are installed
correctly. See "Installing the batteries" on page
1-7. Also, make sure that you are using
appropriate batteries and that they are sufficiently
charged. See "Replacing the batteries" on page 1-8
and "Charging the batteries" on page 1-6.
Your camera may not be compatible with local
television broadcasting standards. Select either
the NTSC or PAL signal system to match the
television broadcasting standards in your
country. See "Selecting the signal system and
language" on page 4-22 for details.
Note:
Also, see your television documentation for possible
solutions.
.