Epson PhotoPC 3000Z User Manual page 91

4. Press the Index button to select a several-per-
sheet layout.
5. Press the Index print button to select All or
Selected. Refer to the chart below for details.
Setting Result
All Index sheets containing all of the
photos saved on the memory card will
be printed. Skip to step 12.
Selected Index sheets containing the selected
photos will be printed. Proceed to the
next step.
Note:
Print Mark can handle a maximum of 1,000 photos on
each memory card. Even if you select All, the program
cannot access the photos in excess of the limit.
6. If you chose Selected, press the Select Image
button to specify the photos that you wish to
include in your index print.
7. Press the left and right arrow icon buttons to select
a photo that you wish to include with the white
frame. The number at the bottom in the LCD
monitor shows the frame number.
Note:
You can enlarge the preview of the selected photo by
pressing the magnification icon button. Press the
BACK button to return to the normal selection screen.
8. Press the up and down arrow icon buttons to
specify the number of copies of the selected photo
to print in each index. You can specify up to 99
copies. When you specify a value other than 00, a
check mark appears on the selected photo. The
value 00 implies no selection.
9. Repeat steps 7 and 8 above to select other photos
to include and to specify the number of copies.
10. Press the BACK button.
11. Press the Done button to confirm your settings.
If you change your mind, press the BACK button
to return to the photo selection screen. To quit
without making the new DPOF file, press
Cancel.
Using Print Mark to Print Photos
5
5-5