Epson PhotoPC 3000Z User Manual page 58

Erasing all of the photos
To erase all of the photos stored on the memory card
in your camera at once, follow these steps.
1. Set the dial switch to
2. Press the Select Image button.
3. Press the Delete All button to erase all of the
photos at once.
4. A confirmation message appears. Press Yes to
erase all of the photos. Press No to cancel.
Note:
If any photos are locked, a message is displayed
confirming that you want to erase the locked photos.
Press No to erase only the unlocked photos. Press Yes
to erase all photos, including those that are locked. For
information on locking and unlocking photos, see
"Locking and unlocking photos" on page 3-9.
Erasing selected photos
To erase selected photos from the memory card in
your camera, follow these steps.
1. Set the dial switch to
3-8
Viewing and Managing Your Images
, then turn on the camera.
, then turn on the camera.
To make selecting photos easier, you can display
either four or nine photos at a time by pressing the
Multi button once or twice. Multiple photos are
displayed and a white frame appears around the
selected photo.
2. Press the Select Image button. Then press the
arrow icon buttons to select the photo that you
want to erase with the white frame.
3. To mark that photo, press Sel. to Delete. A white
frame appears around the selected photo.
4. To mark more photos, repeat steps 2 and 3.
5. After you have marked all of the photos that you
want to erase, press the Back button to erase
them.
6. A confirmation message appears. Press Yes to
erase the selected photos. Press No to cancel.
Note:
If any photos are locked, a message confirming that you
want to erase the locked photos is displayed. Press No
to erase only the unlocked photos. Press Yes to erase
all photos, including those that are locked. For
information on locking and unlocking photos, see
"Locking and unlocking photos" in the next section.