Deleting The Dpof File; Lcd Monitor Messages - Epson PhotoPC 3000Z User Manual

Deleting the DPOF File

To delete your DPOF file, follow the steps below.
1. Set the dial switch to
2. Press the PrintMark button. The Print Mark main
menu is displayed.
3. Press the Delete button. A confirmation message
appears.
Press the Done button to delete the DPOF file. To
4.
return to the main menu, press the Cancel
button.
5. To quit the Print Mark program, press the Exit
button.
Note:
Pressing New settings allows you to make a new
DPOF file. See "Making the DPOF File" on page 5-2
for details.
and turn on the camera.

LCD Monitor Messages

When you use the Print Mark program, various error
and status messages may appear on the LCD monitor.
For detailed explanations of these messages, refer to
the following table.
Message Explanation
No photos in This message appears when there are
memory. no photos saved on the memory card.
Press the BACK button to return to the
program selection menu. Turn off the
camera and insert a memory card that
contains photos.
Error! This message appears when you
remove the memory card while using
Unable to access
the Print Mark program. Press the BACK
DPOF file.
button to return to the main menu. Turn
off the camera and reinsert the
memory card before turning the
camera back on.
Note:
Never remove the memory card during
operation; otherwise, the photos on the
memory card may be lost.
No memory card The memory card is not inserted in the
inserted. camera. Insert the memory card and
press BACK button.
Using Print Mark to Print Photos
5
5-7