Epson PhotoPC 3000Z User Manual page 89

3. Press the New settings button.
Note:
If a previous DPOF file exists, a message appears to
confirm that you want to delete it. Press Done to
continue or Cancel to quit.
4. Press the Standard button to select a one-per-
sheet layout.
5. Press the Select Image button. The saved photos
appear.
6. Press the right and left arrow icon buttons to select
a photo that you wish to print with the white
frame. The number displayed at the bottom of the
LCD monitor is the image's frame number.
Note:
Print Mark can handle a maximum of 1,000
photos on each memory card. If the card contains
more than 1000 photos, the program cannot access
the photos in excess of the limit.
You can enlarge the preview of the selected photo
by pressing the magnification icon button at
the top-left of the LCD monitor. Press the BACK
button to return to the normal selection screen.
7. Press the up and down arrow icon buttons to
specify the number of copies of the selected photo
to print. You can specify up to 99 copies. When
you specify a value other than 00, a check mark
appears on the selected photo. The value 00
implies no selection.
8. Repeat steps 6 and 7 to select other photos and
specify the number of copies.
Press the BACK button. A message appears
9.
confirming the number of frames that are
selected.
10. Press Done to accept your settings. If you change
your mind, press BACK to return to the photo
selection screen. To quit without making the new
DPOF file, press Cancel.
11. If you want to print an index of the selected
images in addition to the standard layout prints,
press Add Index and proceed to the next step. If
you do not need an index print, proceed to step 15.
Using Print Mark to Print Photos
5
5-3