Magnifying Photos; Viewing A Slide Show Of Your Photos - Epson PhotoPC 3000Z User Manual

2. To display four photos at a time, press the Multi
button once. Multi changes to 1/9, and small
"thumbnails" of the last four photos you took
appear on the screen, with the currently selected
photo framed in white.
Press the 1/9 button to display nine photos at a
time. 1/9 changes to 1/1.
3. Press the arrow icon buttons to select an photo
with the white frame. Hold the button down to
move through the photos quickly.
When the frame reaches the first or last photo in
the current group, the previous or next group of
photos is displayed.
4. To display only the currently selected photo,
press the 1/1 button. 1/1 changes to Multi.

Magnifying photos

You can view a magnified version of the photos saved
in your camera on the LCD monitor. Follow the steps
below.
1. Set the dial switch to
3-2
Viewing and Managing Your Images
, then turn on the camera.
2. To magnify the currently displayed photo, press
the button.
3. A magnified view of the photo appears, and an
icon in the top left corner of the LCD monitor
indicates the portion of the photo which is
currently displayed. Scroll the screen up, down,
right, or left using the arrow icon buttons. You can
scroll quickly through the screen by holding
down any one of the arrow icon buttons.
Note:
When magnifying a panoramic picture, you can only
scroll left and right.
4. To exit the magnification screen, press BACK.

Viewing a slide show of your photos

The slide show feature plays back a series of photos
on your camera's LCD monitor. Your PhotoPC
3000Z's slide show includes navigation features and
gives you full control of the photos in your slide show.
To use the slide show, follow the steps below.
Note:
To adjust the brightness of the LCD monitor, see "Setting
the LCD monitor's brightness level" on page 4-21.