Epson PhotoPC 3000Z User Manual page 47

Note:
The settings that you make in the
remain when you use the time lapse feature. To make
settings, turn the dial switch to
appropriate settings before using the time lapse feature.
You cannot take TIFF files when using the time lapse
feature.
1. Secure the camera on a flat surface or tripod.
2. Remove the lens cap, turn the dial switch to
and turn on the camera. Push the Mode Change
button until CONTINUOUS is displayed at the top
of the LCD monitor. A red frame appears around
the previewed image and CONTINUOUS is
displayed at the top of the LCD monitor.
3. Press the Mode Change button. INTERVAL is
displayed at the top of the LCD monitor.
4. The hours, minutes, and seconds appear in the
center of the screen with the seconds highlighted.
Press the up and down arrow icon buttons to
change the value of the highlighted time unit. To
highlight a different time unit, press the left and
right arrow icon buttons.
dial position
and make the
5.
,
6.
If you wish to quickly select either the longest or
the shortest available interval, you can toggle
between 24 hours and the shortest available
interval by pressing the Max/Min button.
Note:
The shortest available interval varies depending on the
current image quality, shutter speed, and audio
recording settings.
Once you have set the desired interval, frame the
subject in the LCD monitor and press the shutter
button to begin taking photos.
Note:
The camera may turn off automatically after you
take the first picture. It automatically turns back
on to take pictures at the specified time.
When using the self timer feature, the camera
takes a photo ten seconds after you press the
shutter button, then continues taking photos at
the specified time lapse interval.
To turn off the time lapse feature, press the
Int appears on the
POWER button while
camera's display panel.
Taking Pictures
2
2-15