Using The Automatic Shut-Off Feature; Setting The Lcd Monitor's Brightness Level - Epson PhotoPC 3000Z User Manual

Using the automatic shut-off feature

When using this feature, your camera saves battery
power by automatically shutting off when idle for a
designated period of time. You can have the camera
shut off after ten seconds, thirty seconds, one minute,
three minutes, or five minutes. This feature is only
enabled when using batteries to power the camera.
Note:
If the camera is connected to a computer with a serial cable,
the power automatically turns off when the camera is idle
for one minute.
Changing the setting
To change the automatic shut-off interval, follow these
steps.
1. Set the dial switch to
2. Press the Camera SETUP button. The current
setting appears at the top-right corner of the LCD
monitor.
3. Press the Power Save button. You can select
10 seconds, 30 seconds, 1 minute, 3 minutes, or
5 minutes as the interval.
4. Press BACK to save your setting.
and turn on the camera.
Turning the camera back on
When the dial switch is set to a red icon, you can turn
the camera back on by pressing the shutter button or
the POWER button.
When the dial switch is set to
turn the camera back on by pressing any button on the
back of the camera, or the POWER button.

Setting the LCD monitor's brightness level

Follow these steps to change the LCD monitor's
brightness level.
1. Set the dial switch to
2. Press the Camera SETUP button.
3. Press the arrow icon buttons to increase or
decrease the brightness level.
4. Press the BACK button to return to the previous
screen.
, , or , you can
and turn on the camera.
4-21
Making Settings
4