Charging The Batteries - Epson PhotoPC 3000Z User Manual

Charging the batteries

The Ni-MH Battery Charger charges your Ni-MH
rechargeable batteries quickly for use in your camera.
If you are using alkaline batteries, see "Installing the
batteries" on page 1-7
Before charging your batteries, read the safety
instructions outlined in "When using the charger and
batteries" on page 5.
w
Warning:
Do not use the Ni-MH Battery charger with any
batteries other than the Ni-MH rechargeable
batteries supplied with your printer (Model EU-
24).
Always charge batteries from the same package
as a set. Do not mix old and new batteries.
Follow the steps below to charge your Ni-MH
batteries.
1. Insert the batteries into the compartments,
positioning the + and - ends as shown.
c
Caution:
You must charge four batteries at a time.
1-6
Getting Started
2. Connect the power cord to the battery charger as
shown below.
charger light
3. Plug the power cord into an electrical outlet. The
red charger light turns on, indicating that the
charger is working.
c
Caution:
Make sure that all plugs and connectors are
firmly and completely connected.