Setting The Flash - Epson PhotoPC 3000Z User Manual

4. Turn the camera's dial switch to
press the image quality button
camera until
5. Press the shutter button to take a TIFF photo.
Note:
After you take a TIFF photo, the camera takes
approximately 32 seconds to process the image.

Setting the flash

The flash has the following effective ranges,
depending upon the optical zoom ratio and whether
or not the macro setting is used.
Wide (minimum zoom): 50-420 centimeters
Tele (maximum zoom): 50-340 centimeters
Macro:
The effective flash range varies depending on the
sensitivity setting (see page A-3 for details).
4-4
Making Settings
or , then
on the top of the
appears on the display panel.
20-50 centimeters
Turn on the camera and press the
of the camera to cycle through the flash settings. The
settings appear on the display panel as shown below.
Automatic (default setting)
Red-eye reduction
Forced flash
Flash off
Slow synchro
(Program and Manual modes only)
The flash settings are as follows:
Automatic
The flash fires automatically whenever more
lighting is needed.
button on the top