Epson PhotoPC 3000Z User Manual page 79

Manual exposure
Manual exposure allows you to manually adjust the
shutter speed and the aperture to set the exposure.
Make the manual exposure setting as follows.
Note:
You cannot make manual exposure settings when taking
pictures with the viewfinder.
1. Make sure that Manual is selected as the camera
mode. See "Making camera mode settings" on
page 4-5 for details.
2. Remove the lens cap, turn on the camera, and set
the dial switch to
3. Press the button at the top-right of the LCD
monitor repeatedly until Manual Exposure is
displayed.
4. To adjust the aperture, press the left and right
arrow icon buttons.
To adjust the shutter speed, press the up and
down arrow icon buttons.
.
Fixed settings
When using the Manual camera mode, the fixed
settings feature allows you to make certain settings for
a photo, and then save them. Once they are saved, you
can use them again when taking subsequent pictures.
This helps you achieve similar photographic results
under similar conditions, without having to remake
the settings.
Note:
This feature is only available in the Manual camera
mode when Fixed Settings is selected.
The fixed settings feature is unavailable when taking
pictures using the viewfinder or when using an
external flash.
Once you have enabled the fixed settings feature, you
can save the following settings.
Shutter speed
Aperture
Sensitivity
White balance
4-15
Making Settings
4