Epson PhotoPC 3000Z User Manual page 104

The camera's memory card may be full. Check the
picture counter on the display panel. If it reads 0
(zero), your memory card is full. Erase some
pictures using the LCD monitor, or transfer the
pictures to your computer and then erase them.
Note:
To erase pictures using the LCD monitor, see "Erasing
images" on page 3-7. To transfer pictures to your
computer before erasing them, see the EPSON Digital
Camera Software User's Guide.
The camera may be connected to your computer.
When it is connected, you cannot use any of the
buttons on the camera itself. See the EPSON
Digital Camera Software User's Guide for
instructions on taking pictures using your
computer.
7-4
Maintenance and Troubleshooting
The camera takes too long to take a picture.
You may be pressing the shutter button all the
way down at once. This forces the camera to focus,
make exposure adjustments, and capture the
image all at the same time. To make the process
more efficient, you can have the camera perform
these operations separately. First, depress the
shutter button halfway to lock the auto focus, then
press the shutter button the rest of the way down
to take the photo. For more information, see
"Taking Pictures Using the Viewfinder" on page
2-6, or "Taking Pictures Using the LCD monitor"
on page 2-9.
If you want to take pictures quickly in succession,
use the continuos shooting feature. This feature
allows you to take up to ten pictures in succession
before the camera saves them to the memory card.
See "Using the continuous shooting feature" on
page 2-14.
The flash does not work.
Make sure that your flash is not set to
when using the automatic flash setting, the
flash only fires when there is insufficient light. See
"Setting the flash" on page 4-4 for details on
setting the flash.
. Also,