Epson PhotoPC 3000Z User Manual page 78

Auto exposure
Auto exposure is an easy-to-use feature that
automatically adjusts the shutter speed and the
aperture to achieve the correct exposure. Select the
auto exposure feature as follows.
1. Make sure that Manual is selected as the camera
mode. (See "Making camera mode settings" on
page 4-5.)
2. Remove the lens cap, set the dial switch to
, and turn on the camera.
If the dial switch is set to
MENU ON/OFF button on the back of the
camera to turn on the LCD monitor.
3. Press the button at the top-right of the LCD
monitor repeatedly until Auto Exposure is
displayed.
4. To make fine exposure adjustments, press the
LCD monitor buttons next to
the exposure value.
4-14
Making Settings
Aperture priority
or
, press the
to raise or lower
Aperture priority allows you to select the aperture
first, so that the camera automatically adjusts the
shutter speed for the correct exposure. Select the
aperture priority feature as follows.
1. Make sure that Manual is selected as the camera
mode See "Making camera mode settings" on
page 4-5 for details.
2. Remove the lens cap, set the dial switch to
, and turn on the camera.
If the dial switch is set to
MENU ON/OFF button on the back of the
camera to turn on the LCD monitor.
3. Press the button at the top-right of the LCD
monitor repeatedly until Aperture Priority is
displayed.
4. To change the aperture value, press the left and
right arrow icon buttons.
To adjust the exposure, press the buttons next to
at the right side of the LCD monitor.
or
, press the