Table of Contents
Advertisement
Controller
Checks to make sure basic operation of drive and
controller are working properly.
Seek
Checks to make sure the read/write head assembly
works properly.
Drive Ready
Checks to make sure the drive is ready to accept and
execute commands.
All Tests
Runs all the tests listed above.
WARNING:
The Sequential Write, Sequential Write-Read,
Random Write, Random Write-Read, and All Tests diagnostics
selections will destroy data already on the disk! For these
tests, we urge that you back up any data on the drive
FIRST or run them BEFORE you partition and logically
format the drive, or all data will be lost.
6.
Once you finish testing the drive, press the [F9] key,
then the [FlO] key to leave the utility programs.
56
Advertisement
Table of Contents
