Everex Everdisk Owner's Manual And Reference Manual page 36

3. Remove the system cover (see Appendix 1 on how to
remove the system cover).
4. Remove the hard disk controller from the anti-static
bag; then make sure the controller is configured for the
drive you have (see Section 4.2 for instructions on
configuring the controller).
5. Locate an available expansion slot cover nearest the
floppy disk controller and remove the screw that holds
the expansion slot cover in place; lift the slot cover off.
Be sure to save the screw, as you will use it to secure
the controller later.
,
e:b
I
Figure 6: Removing the Expansion Slot Cover
28