Table of Contents
Advertisement
5.3.2 Installing
Two
External Drives
The procedures for installing two external drives are similar
to installing one external drive; however, the two external
drives are two half-height drives encased in a full-height
subchassis with its own power supply.
Before you install the two-drive subchassis, make sure you
configure the hard disk controller board so two drives are
usable by the controller (see Section 4).
Then use the
instructions in Section 5.3.1 to connect your two-drive
subchassis to your system.
WARNING: DO NOT open the two-drive external hard disk
subchassis; the drives have already been properly configured as
drive 1 and drive 2. Also, many internal parts of the subchassis
can produce electrical shock.
NOTE: The second drive will be recognized as drive "D".
40
Advertisement
Table of Contents
