Everex Everdisk Owner's Manual And Reference Manual page 22

MICROPOLIS 44.5MB 1333A and 71.3MB 1335:
The
drive select jumper (DS) is the 12-pin jumper block located
between the cable connectors. Do not remove the jumpers
from WI and W2 positions. For physical drive 1, put jumper
on position DSl; for physical drive 2, put jumper on position
DS2. Please note the position of the terminating resistor
also.
o
J2
D
PIN 1
o
COMPONENT SIDE
J1
o
DS4 (ADDRESS 4)
• • DS3 (ADDRESS 3)
• • DS2 (ADDRESS 2)
INTERFACE E.:::!J
DS1 (ADDRESS 1)
TERMINA TOR RN1
[!:3
W2 (SELECT)
[!:3
W1 (WRITE FAULT LATCH)
Figure ID: Micropolis 12-pin Drive Select Jumper
14