Deleting Partitions; Logical Formatting - Everex Everdisk Owner's Manual And Reference Manual

6.3.4 Deleting Partitions
If you need to delete a partition, use the following
instructions:
1. Choose the physical drive that contains the partition
you want to delete. The software defaults to physical
drive 1; press the [F6] key to select physical drive 2.
2. To select the partition you want to delete, press the [F2]
key to move the cursor to the
Partitions
menu field, use
the up and down cursor keys to select the partitions you
want deleted, and press the [F2] key again to confirm
your selection. WARNING:
If
you delete the Primary
DOS Partition, the hard disk drive
will
not
be
bootable
from DOS!
3. Press the [F8] key to delete the chosen partition;
heed
the warnings about losing data if you delete the partition.
Make sure the partition you delete does not contain
valuable data.
6.4 Logical Formatting
The logical formatting process organizes the data blocks, or
clusters, on the hard disk drive and transfers the DOS
system files to the drive. You will need a DOS system
diskette to complete the logical formatting process.
50