Table of Contents
Advertisement
1.
From the DISK Main Menu, press the [F4] key, Logical
Format.
2. The program will ask for which physical disk to format,
whether to copy the DOS system files to ;he disk, and
an optional disk label.
The software automatically defaults to physical drive 1;
select 2 to logically format the partitions in physical
drive 2.
If you are formatting the Primary DOS
partition, enter Y to copy the DOS system files;
otherwise enter N. If you want a volume label for your
drive, enter a volume label name up to 11 characters
long.
3. Press the [FS] key to begin the logical format.
This
process takes a few minutes to complete so please be
patient.
4. When the logical format is completed, a message will
prompt you to replace the EVERDISK utility diskette
with the DOS system diskette.
5.
After you insert the DOS system diskette, press the
[Enter] key to transfer your DOS system files to the
hard disk. Press [Enter] again; you will be prompted to
replace the DOS system diskette with the EVERDISK
utility diskette.
51
Advertisement
Table of Contents
