Table of Contents
Advertisement
drive to test, whether to do a continuous drive test, and
the duty cycle percentage value (100 percent means
testing the drive at maximum performance capabilities);
and the group on the lower right displays the test status.
4. Move the cursor with the cursor keys to the upper right
group; select the physical drive you want to test, select
whether or not to do a continuous test, and select the
duty cycle.
NOTE: For the duty cycle, we do not recommend entering
100 percent if you choose to do a continuous test, as this
may damage the drive if the continuous test is done over a
long period of time.
5. Move the cursor to the left menu field, and use the up
and down cursor keys to select the test you want to run.
Table 2 below is a description of each test.
54
Advertisement
Table of Contents
