Table of Contents
Advertisement
User Precautions
To avoid possible hazardous situations and to prevent
damaging your EVERDISK subsystem, please read the
following precautions
carefully.
1.
Turn OFF your system and disconnect the power cable
before you begin the installation. Make sure NO power
goes to your system!
2. Clear an area around your computer to make working
on your computer easier.
3. The hard disk drive and drive controller are easily
damaged by static electricity; to avoid such damage,
touch the system chassis before handling the drive and
controller, and try not to touch the circuitry on the
,-..,
drive and controller.
Also, limit your movements as
much as possible as you work on your system.
4. The hard disk drive contains fragile parts that are
easily damaged; please handle the drive as gently as
possible.
5. Do not remove any stickers attached to the metal side
of the drive, as this will void the warranty.
6.
Do not open the cover of the external drive subchassis;
this will void the warranty, and some internal parts may
produce electrical shock.
4
Advertisement
Table of Contents
